• <legend id="8y6s0"></legend>
    <rt id="8y6s0"><s id="8y6s0"></s></rt>
  • 详细说明

    SZE-24YCA 2

    收藏
    • 产品说明

    20170314185382508250.jpg

      本機特點:

      PLC控制,油馬達預塑,全液壓驅動,自動循環;

      塑化能力高,塑化溫度可預選自控。

      采用24點計量,使用時根據各工位模具要求,選定注射量。

      設有空模選擇功能。采用變頻轉位。

      采用單缸直拉雙聯板剪式合模機構。

      設有二次壓力注射。設有先后壓楦,合模順序的選擇功能。

      圓盤轉位平穩,快慢調整方便。

      圓盤轉位與塑化,注射工作供油分開控制。

      工位多,定型時間長,易保證鞋底成型質量。

      可選配伺服節能系統, 可節省電量30%左右。

      Structure characteristics:

      PLC controlled,pre plasticized by hydraulic motor,driven by full hydraulic pressure,and cycled automatically.

      High plastifying capacity,the plastifying temperature can be controlled automatically by preselection.

      It adopts 24 points measuring and the injection volume can be chosen according to the requirements of the moulds at each working position.

      The function of empty mould selection has been provided.

      Parallel mould plate closing mechanism is adopted,which linked with a toggle system operated by single cylinder.

      The machine is equipped with two time pressure injection system and the cramp pressing and mould closing order selecting function.

      The round table indexes smoothly and it’s movement can easily be adjusted.

      The round table rotation,plasticizing and oil supply for the injection are controlled independently.

      There are many working positions,the time for setting is longenough,andguarantees the setting quality of shoe soles.

      Selecting servo energy conservation system to save about 30% energy.

      主要技術參數:

    項目/ITEM

    單位/UNIT

    規格/SPECIFICATION

    SZE-24YCA

    2SZE-24YCA

    工位數        Number of stations

    Station

    24

    24

    螺桿直徑      Screw Diameter

    mm

    75

    75 ,70

    螺桿轉速      Screw rotating speed

    r/min

    0-160

    0-160

    螺桿長徑比    Screw length and diameter ratio


    19:1

    19:1 , 18:1

    最大注射容積  Max injection capacity

    cm3

    660

    660 ,580

    塑化能力      Plastifying capacity

    g/s

    40

    40

    注射壓力      Injection pressure

    Mpa

    5.0

    5.0

    圓盤壓力      Disc pressure

    Mpa

    3.0

    3.0

    合模方式      Clamp mould style


    剪式/Scissors

    剪式/Scissors

    提楦行程      Last trip

    mm

    60

    60

    鞋楦高度      Shoe cramp height

    mm

    210-260

    210-260

    ?虺叽      Mould frame dimensions

    mm(LxWxH)

    340x180x60

    340x180x60

    電機功率      The motor power

    KW

    21.5

    36.5

    整機外形尺寸  Outline dimensions of the whole machine

    mm(LxWxH)

    7300x3940x1955

    8400x6800x1955

    整機重量      Total weight of the whole machine

    kg

    13500

    15500

      以上技術規格僅供參考,如有任何變更或修改,恕不另行通知。

      Technical specifications are indicative.Machines may undergo variations and/or modifications whithout any previous notice.

    咨詢電話:0711-3355178

    地址:鄂州市凡口經濟開發區順合路42號

    微信二維碼

    公眾號

    技术支持: 萬家推云平臺 | 管理登录
    ×
    seo seo
    男人天堂免费视频_国产精品黄色电影_又爽又黄又大又硬又粗免费_日韩人妻丝袜无码中文字幕_欧美精品一区二区三区免费_亚洲中文字幕无码超碰